Las tuercas grado 2 es una tuerca de resistencia media fabricado a partir de un acero.o. Esta tuerca usualmente la utilizan únicamente con tornillos de su mismo grado, ya que tiene las mismas características y están fabricadas para eso.
Tuerca hexagonal liviana Grado 2 NC
SKU: TUG2
Tuerca hexagonal liviana Grado 2 NC
Tuerca hexagonal SAE J429 de diferentes diámetros para ser utilizados en tornillos grado 2 máquina.
Categorias: Tuercas
$0.15 – $320.34
| Tipo | Tuerca hexagonal |
|---|---|
| Grado | SAE J429 |
| Material | Acero |
| Cuerda | UNC Estandar |
| Dimensiones | ASME B18.6.3 |
| Acabado | Natural |
| Diámetro | 1/8, 6/32, 5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 3/8, 1 1/2, 1 5/8, 1 3/4, 1 7/8, 2, 2 1/4, 2 1/2, 2 3/4, 3 |
Tuerca Hexagonal Pesada SAE J995 Gr 2/ ASTM A563 Gr A
| Diámetro | Ancho entre caras (F) | Ancho entre esquinas (G) | Grosor de las tuercas hexagonales (H) | ||||||
| básico | MAX | MIN | MAX | MIN | Basic | Max | Min | ||
| 1/4 | 0.2500 | 1/2 | 0.500 | 0.488 | 0.577 | 0.556 | 15/64 | 0.250 | 0.218 |
| 5/16 | 0.3125 | 9/16 | 0.562 | 0.546 | 0.650 | 0.622 | 19/64 | 0.314 | 0.280 |
| 3/8 | 0.3750 | 11/16 | 0.688 | 0.669 | 0.794 | 0.763 | 23/64 | 0.377 | 0.341 |
| 7/16 | 0.4375 | ¾ | 0.750 | 0.728 | 0.866 | 0.830 | 27/64 | 0.441 | 0.403 |
| ½ | 0.5000 | 7/8 | 0.875 | 0.850 | 1.010 | 0.969 | 31/64 | 0.504 | 0.464 |
| 9/16 | 0.5625 | 15/16 | 0.938 | 0.909 | 1.083 | 1.037 | 35/64 | 0.568 | 0.526 |
| 5/8 | 0.6250 | 1 1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 39/64 | 0.631 | 0.587 |
| 3/4 | 0.7500 | 1 ¼ | 1.250 | 1.212 | 1.443 | 1.382 | 47/64 | 0.758 | 0.710 |
| 7/8 | 0.8750 | 1 7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 55/64 | 0.885 | 0.833 |
| 1 | 1.0000 | 1 5/8 | 1.625 | 1.575 | 1.876 | 1.796 | 63/64 | 1.012 | 0.956 |
| 1 1/8 | 1.1250 | 1 13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 1 7/64 | 1.139 | 1.079 |
| 1 ¼ | 1.2500 | 2 | 2.000 | 1.938 | 2.309 | 2.209 | 1 7/32 | 1.251 | 1.187 |
| 1 3/8 | 1.3750 | 2 3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 1 11/32 | 1.378 | 1.310 |
| 1 ½ | 1.5000 | 2 3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1 15/32 | 1.505 | 1.433 |
| 1 5/8 | 1.6250 | 2 9/16 | 2.562 | 2.481 | 2.959 | 2.828 | 1 19/32 | 1.632 | 1.556 |
| 1 ¾ | 1.7500 | 2 3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1 23/32 | 1.759 | 1.679 |
| 2 | 2.0000 | 3 1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1 31/32 | 2.013 | 1.925 |
| 2 ¼ | 2.2500 | 3 1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 2 13/64 | 2.251 | 2.155 |
| 2 ½ | 2.5000 | 3 7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 2 29/64 | 2.505 | 2.401 |
| 2 ¾ | 2.7500 | 4 1/4 | 4.250 | 4.112 | 4.907 | 4.688 | 2 45/64 | 2.759 | 2.647 |
| 3 | 3.0000 | 4 5/8 | 4.625 | 4.475 | 5.340 | 5.102 | 2 61/64 | 3.013 | 2.893 |
| 3 ¼ | 3.2500 | 5 | 5.000 | 4.838 | 5.774 | 5.515 | 3 3/16 | 3.252 | 3.124 |
| 3 ½ | 3.5000 | 5 3/8 | 5.375 | 5.200 | 6.207 | 5.928 | 3 7/16 | 3.506 | 3.370 |
| 3 ¾ | 3.7500 | 5 3/4 | 5.750 | 5.562 | 6.640 | 6.341 | 3 11/16 | 3.760 | 3.616 |
| 4 | 4.00 | 6 1/8 | 6.125 | 5.925 | 7.073 | 6.755 | 3 15/16 | 4.014 | 3.862 |
| Tuerca Hexagonal Pesada SAE J995 Gr 2/ ASTM A563 Gr A | |
| Descripción | Sujetador de seis caras roscado en el interior. |
| Aplicación | Utilizadas con tornillos de bajo carbono. |
| Material | Carbono: 0.55% max; Fósforo: 0.12% max; Sulfuro: 0.023%max |
| Tratamiento Térmico | NA |
| Dureza del núcleo | Rockwell B68-C32 |
| Carga de Prueba | Rosca UNC- 100,000 psi Rosca UNF- 90,000 psi |
| Tipo | Tuerca hexagonal |
|---|---|
| Grado | SAE J429 |
| Material | Acero |
| Cuerda | UNC Estandar |
| Dimensiones | ASME B18.6.3 |
| Acabado | Natural |
| Diámetro | 1/8, 6/32, 5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1, 1 1/8, 1 1/4, 1 3/8, 1 1/2, 1 5/8, 1 3/4, 1 7/8, 2, 2 1/4, 2 1/2, 2 3/4, 3 |